These bags are for protecting the removable side curtains on British cars, at the moment we are only producing

ones for the MGA but will shortly be covering other makes. They are made from the same material as our fender

Blankets and with the same standard of workmanship and detail. The windows in the Side Curtains are easily

marked if handled roughly, These bags work a treat to prevent that happening. 

 

US $49.00
SKU cover-sw-mga

This is a tailor made car cover for a Classic Mini. It is an indoor cover and not waterproof. Completely washable,

very soft and does come with a storage zip-up bag. The centre section does come in various patterns and colours.

It fits to the contour of the body, rather than a general small cover of the "fits most small cars" type.

At the moment we are only producing these covers for the Classic Mini's.

 

US $249.00
SKU cc-mini

 

Opus Ignition Amplifier. This is a brand new still in the Lucas box unit. It is ready to Plug in and go.

The Hall Effect Sensor, Harness connection and the Advance and Retard are all on the unit. It is 

for any distributor fitted with the Opus system including. 1975/79 MGB, Midget 1500, and 1500 Spitfire.  

RETURN

US $199.95
SKU 54429790

 

Rear Brake Shoes for an MGC they are New Old Stock in good condition.

RETURN

US $44.95
SKU 10185

SALES ITEM
Complete set of Locking Wheel nuts will fit an MGB, (3/4" UNF thread) very easy to use. Just push the Key in place no twisting rusty locks to remove the covering cylinder. Once the key is in place just slide off the covering chrome cylinder for access to the Wheel nut. One for each wheel.  

Return

US $19.95
SKU 264-980-1

 

This exhaust is for a 1990 Mini and later, fitted with the HIF44 Carb. and the twin Exhaust Manifold. It is a complete system with no Catalytic Converter or Oxygen Sensor plug. It is a MG Rover manufactured system. It will be supplied with two manifold clamps

To make the shipping cost effective the system will be marked and then cut in half. See the Aug sales video for details it is assumed the buyer can weld the system back together. 

RETURN

US $99.95
SKU GEX12017

US $3.00
SKU 13H577

Brake Drum Rear/Front with Spacer used 1984 on 12" wheels

RETURN

US $38.00
SKU GBD106

Turn-Horn-Flasher Switch from 1989 on

RETURN

US $100.00
SKU BAU5345
This item can be backordered

Switch Turn Signal with H/Dimmer Mk3 for Mk2 to 1976 remove plug connection or see 13H7778

RETURN

US $70.00
SKU 13H7779
Only 1 left in stock

Starter Solenoid Floor Switch

RETURN

US $80.00
SKU 17H5260
Only 1 left in stock

Switch Headlight Toggle Mk1-2 & early Mk3

RETURN

US $30.00
SKU 1H9077

Switch Wiper on Column LH Drive

RETURN

US $90.00
SKU 37H8286
Only 1 left in stock

Switch Brake Pressure Differential Moke 1980 on Triangle head

RETURN

US $35.67
SKU AAU3821
Only 1 left in stock

Interior Light Rocking type switch

RETURN

US $16.00
SKU AAU4825
Only 1 left in stock

Switch Ignition w/Locking assembly 1976 on

RETURN

US $128.00
SKU BHM7107
Only 1 left in stock

Used Ignition Switch w/Locking assembly 1976 on

RETURN

US $70.00
SKU BHM7107-U
Only 1 left in stock

Starter Solenoid Mk1 push button

RETURN

US $30.00
SKU BMK1727

Brake Switch Locknut Brass for 13H3735

RETURN

US $10.25
SKU BMK1903A

Seal For MAQ10002 Switch

RETURN

US $10.88
SKU MAQ10001
This item can be backordered

Starter Solenoid Pre-engaged

RETURN

US $80.00
SKU NAF10004
Only 1 left in stock

Brake Switch Locknut slim for 13H3735

RETURN

US $1.00
SKU NT608041L

Starter Solenoid 4 terminal 1977 on

RETURN

US $28.95
SKU SRB335

Switch Courtesy Light in Door Mk3 on not MPI

RETURN

US $6.75
SKU YUE10003

Switch H/Lights 1976 on Mk4 Three pin

RETURN

US $26.95
SKU YUF101030
This item can be backordered

Switch Brake Check pin terminals 1976 on

RETURN

US $20.95
SKU YUF101650

Switch Hazard pin terminals from 1976

RETURN

US $35.95
SKU YUF101660

Turn-Horn-Flasher fitted on Left Side column LHD from 1976. 1984-86 RHD

RETURN

US $70.00
SKU 21A2660
This item can be backordered

Mini Brakes

 

Return to Mini Catalog

US $130.00
SKU 13H7757

Caliper Piston Stainless Steel 2" dia for 8.5 Calipers

RETURN

US $17.99
SKU 114713

Caliper Piston 2" dia for 8.5 Caliper

RETURN

US $14.00
SKU 114713-1
This item can be backordered

Shim Anti-squeal 8.4" disc Mini, Midget

RETURN

US $2.22
SKU 17H2460

Caliper Piston Stainless Steel Cooper 997/998 "S' Incorrectly numbered

RETURN

US $21.00
SKU 17H7913

Brake Pad Retainer 1-1/2" Mini, Midget

RETURN

US $3.50
SKU 17H7963

Caliper Piston Stainless S and 1275 GT 1-3/4 Dia

RETURN

8

US $21.00
SKU 17H8626

Caliper O-Ring Bridge seal small 7.5 Disc MGB

RETURN

US $9.00
SKU 17H8764

Spring Brake Shoe Retainer Front (Beehive)

RETURN

US $8.00
SKU 27H3753

Caliper R/H 7.5" rotor to 1974

RETURN

US $139.95
SKU 27H4656
Only 1 left in stock

Caliper L/H 7.5" rotor to 1974

RETURN

US $139.95
SKU 27H4657
Only 1 left in stock

Backing Plate Front R/H 1968 on

RETURN

2
US $70.00
SKU 37H2013

Backing Plate Front L/H 1968 on /p>

RETURN

US $70.00
SKU 37H2014

Gasket Front Wheel Cylinder to Back-plate

RETURN

US $1.50
SKU 37H3833

Caliper Right side, 8.4 Disc 12" wheels 1984 on rebuilt exchange..

RETURN

US $150.00
SKU 37H8128
Only 1 left in stock

Caliper Left side, 8.4 Disc 12" wheels 1984 on rebuilt exchange..

RETURN

US $150.00
SKU 37H8129
This item can be backordered

Brake Caliper Bolt Galvanized grade 5 w/shank

RETURN

US $1.10
SKU 53K1048

Wheel Cylinder Kit fits GWC102/3 (Front) .8125 (13/16) bore

RETURN

US $9.00
SKU 8G8816

Spring Front Brake

RETURN

US $3.00
SKU AAU8243

Wheel Cylinder Kit 15/16 Front fits GWC126/7

RETURN

US $7.90
SKU BHM7068

Fitting Kit For Metro vented Rotor

RETURN

US $10.95
SKU BMC1497

Brake Rotor 7.5" Cooper "S"

RETURN

US $50.00
SKU GBD101

Brake Rotor 8.4 (12" wheel)

RETURN

US $24.00
SKU GBD90806

Brake Hose Front Drum

RETURN

US $10.00
SKU GBH170

Brake Hose Front Disc

RETURN

US $18.00
SKU GBH249

Fitting Kit for Brake Pads 4 pot Caliper

RETURN

US $12.00
SKU GBK1017
Only 1 left in stock

Brake Pads Cooper 997 7" Disc NOS

RETURN

US $55.00
SKU GBP101

Brake Pads Cooper "S" 7.5" disc Mintex

RETURN

US $35.00
SKU GBP103AF

Brake Pads Cooper 7.5" disc low dust (green)

RETURN

US $41.25
SKU GBP103G
Only 1 left in stock

Brake Pads Std. Mini 12" wheels, Midget,Spitfire, TR7/8

RETURN

US $22.95
SKU GBP281

Brake Pads Metro & 4 pot Calipers

RETURN

US $38.00
SKU GBP90306
Only 1 left in stock

Brake Shoe Front Mintex set of 4

RETURN

US $30.00
SKU GBS733
Only 1 left in stock

Brake Shoes Front Mini aftermarket..See Mini:Brakes:Rear:GBS834AF

RETURN

US $21.00
SKU GBS834AF-1
Only 1 left in stock

Caliper Kit Metro "A" 4 pot Lockheed & 8.4 Vented Rotors (Discs)

RETURN

US $19.95
SKU GRK5003

Caliper Kit 7.5" disc, Cooper S

RETURN

US $15.00
SKU GRK5006

Wheel Cylinder Front R/Hand 13/16 Mrk 1 1964-67 gasket = 37H3833 can use GWC1126

RETURN

US $20.00
SKU GWC102

Wheel Cylinder Front L/Hand 13/16 Mrk1 1964-67 gasket = 37H3833 can use GWC1127

RETURN

US $20.00
SKU GWC103

Wheel Cylinder Front R/H OE 1967/84 gasket = 37H3833

RETURN

US $14.00
SKU GWC126Z

Wheel Cylinder Front L/H OE 1967/84 gasket = 37H3833

RETURN

US $14.00
SKU GWC127Z

Caliper Cotter Pin Cooper "S" & 1275 GT 1963-74

RETURN

US $0.95
SKU PS610241

Caliper Piston 4 Pot Stainless Steel inc Metro 1-1/2"

RETURN

US $22.00
SKU SAAS1022

Bolt Rad surround/Wheel Cylinder

RETURN

US $1.00
SKU SH604031-1

Boot Emergency Brake lever

RETURN

US $1.90
SKU 17H7612

Brake Adjuster Tappit

RETURN

US $11.49
SKU 17H7618

Spring Rear Top Midget/Mini

RETURN

US $3.40
SKU 17H7621

Spring Rear Bottom

RETURN

US $4.50
SKU 17H8092

H/Brake Lever Boot on Backplate various

RETURN

US $4.75
SKU 181-760

Backing Plate Rear R/H uses GWC1102 cylinder for GWC1102 requires hole

RETURN

US $70.00
SKU 21A1058
Only 1 left in stock

Backing Plate Rear L/H uses GWC1102 cylinder for GWC1101 requires hole.

RETURN

US $70.00
SKU 21A1060
Only 1 left in stock

Gasket Rear Wheel Cylinder to Back-plate

RETURN

US $2.00
SKU 37H4642

Washer on the Quadrant Wavy

RETURN

US $0.35
SKU AWZ105

Wheel Cylinder Kit Rear 1/2 1275 GT 1974-78 N/A fits GWC1126

RETURN

US $8.00
SKU BHM7015

Brake Drum retaining Screw (short)

RETURN

US $0.70
SKU CMZ407

Brake Drum Retaining screw (long for 1" drum)

RETURN

US $1.50
SKU CMZ422

H/Brake Compensator

RETURN

US $42.00
SKU FAM621

H/Brake Cable Front To Compensator Van, pick-up and Estate

RETURN

US $8.80
SKU FAM625

Brake Hose Rear

RETURN

US $9.50
SKU GBH250

Brake Hose Rear Hydrolastic

RETURN

US $14.50
SKU GBH250-1

Brake Shoes Rear Mini/Midget Mini front pre 1962 single leading shoe OE

RETURN

US $18.00
SKU GBS834AF

Brake Drum Front/Rear

RETURN

US $35.00
SKU GDB105

Wheel Cylinder Kit 11/16 fits GWC1129 Under Midget:brakes same Number

RETURN

US $10.00
SKU GRK2004

Wheel Cylinder Kit rear 3/4 for GWC1102 Under Midget:brakes same number

RETURN

US $10.00
SKU GRK2014

Wheel Cylinder Kit Rear 5/8 for GWC1101

RETURN

US $10.90
SKU GRK2076

H/Brake Cable van Estate 2 cable system Pre 1976

RETURN

US $9.95
SKU GVC1020

H/Brake Cable Dry Susp. 2 cable system Pre 1976

RETURN

US $6.95
SKU GVC2022

H/Brake Cable Rear between Wheels 1976 on

RETURN

US $6.80
SKU GVC2134

H/Brake Cable front to Compensator 1976 on

RETURN

US $5.95
SKU GVC2135

Wheel Cylinder Rear 5/8 to 1967 gasket = 37H4642

RETURN

US $25.00
SKU GWC1101

Wheel Cylinder 3/4" Rear 1970 on except "S" Aftermarket

RETURN

US $14.00
SKU GWC1102

Wheel Cylinder Rear 1/2 bore 1275 GT 1976-77

RETURN

US $19.95
SKU GWC1126

Wheel Cylinder Rear Mini 1974 to 76 Midget 11/16

RETURN

US $25.95
SKU GWC1129

Mounting Plate for Stabilizer bar fits under the master cylinders to 1975 Single line brakes

RETURN

US $29.00
SKU 14A6733
This item can be backordered

Brake Proportioning Valve Mk 1/2 and Mk3 "S" 5/8" rear cyl.

RETURN

US $190.00
SKU 21A1774
This item can be backordered

Brake Proportioning Valve Mk 3 except Mk3 "S" to 1978 3/4"rear Cyl.

RETURN

US $190.00
SKU 21A2031
This item can be backordered

Brake Proportioning Valve Internal Spring for unit 21A1774

RETURN

US $2.12
SKU 27H6620
Only 1 left in stock

Gasket Brake/Clutch Master single line between Cyl and plate

RETURN

US $2.00
SKU 31G279

Gasket Brake Master Cylinder Duel fits between Master and plate

RETURN

US $3.00
SKU 31G840

Brake Master Cylinder Repair Kit "S" 3/4 N/A

RETURN

US $7.50
SKU 8G8258

H/Brake Spring lever to Cable

RETURN

US $1.90
SKU ACH8508
Only 1 left in stock

Plug Rear Brake Back-plate

RETURN

US $5.50
SKU AEU1541A

Mounting Plate for Stabilizer bar fits under the master cylinders 1976 to 98..Dual Cylinder

RETURN

US $20.66
SKU ALA6505
Only 1 left in stock

Mounting Plate for Stabilizer bar fits under Master Cly 1989 on boosted brakes

RETURN

US $35.00
SKU CRC8664
Only 1 left in stock

Brake Proportioning Valve 1978 on Duel system metric fittings

RETURN

US $205.00
SKU FAM7821
Only 1 left in stock

Brake Master Cylinder .70 Single line Plastic Reservoir vertical

RETURN

US $80.00
SKU GMC171

Master Cylinder Single System Metal Res (Large type)

RETURN

US $145.00
SKU GMC172
Only 1 left in stock

Brake Master Cylinder Duel system Square Reservoir Vertical 10mm IFM3417 & 12mm IFM3041 fittin...

RETURN

US $144.95
SKU GMC227
Only 1 left in stock

Brake Master Cylinder 1989-on Duel system Servo assist Horizontal

RETURN

US $159.97
SKU GMC90376
Only 1 left in stock

Brake Master Repair Kit Duel Cylinder to 1976 Cylinder no longer available..see GRK1019-1 as well

RETURN

US $48.35
SKU GRK1019
Only 1 left in stock

Brake Master Repair Kit full kit with spring etc N/A Lockheed

RETURN

US $56.34
SKU GRK1019-1

Brake Master Cylinder Repair Kit .70

RETURN

US $8.00
SKU 8G8689
Only 1 left in stock

Brake Master Kit Boosted brake

RETURN

US $55.00
SKU GRK1032

Brake Master Kit Boosted brake

RETURN

US $48.75
SKU GRK1035

Brake Proportioning Valve Adjustable for use on Modified cars

RETURN

US $219.00
SKU MS72
Only 1 left in stock

Gasket Brake/Clutch Masters single line fits under the plate

RETURN

US $5.00
SKU NAM9197

Brake Line Clip various

RETURN

US $0.95
SKU PCR307

Switch Brake Light Mechanical off the Pedal (plastic)1976 on.For locknut see BMK1903A

RETURN

US $11.95
SKU 13H3735

Lamp Rear L/H Mk1

RETURN

US $94.95
SKU 13H222
Only 1 left in stock

Lamp Rear R/H Mk1

RETURN

US $94.95
SKU 13H223
Only 1 left in stock

Mini Mk 2, Morris 1100 Turn/Horn and H/light dim with bullet connectors

RETURN

US $80.00
SKU 13H7778
Only 1 left in stock

Return 
HPBooks Weber Carburetors

Information about Downdraft and Sidedraft Webers

Includes Single, Twin and Triple Choke units.  

US $29.95
SKU HPBooks_Weber
Only 1 left in stock

Return Mini 
Inner Rocker Van/Traveller/Clubman L/H
Inner Rocker no cut-out 1974 on L/H Van/Traveller/Pickup
US $38.00
SKU MBP-023

Return Mini 
Inner Rocker Van/Traveller/Clubman R/H
Inner Rocker no cut-out 1974 on R/H Van/Traveller/Pickup
US $38.00
SKU MBP-022

Return Mini 
Inner Rocker Van/Traveller/Clubman L/H
Inner Rocker no cut-out to 70 L/H Van/Traveller/Pickup
US $43.00
SKU MBP-025

Return Mini 
Inner Rocker Van/Traveller/Clubman R/H
Inner Rocker no cut-out to 70 R/H Van/Traveller/Pickup
US $43.00
SKU MBP-024

Return Mini 
Rocker Mk1-2 Van/Pickup to 1970 R/H
(4 Flutes)
Rocker Mk1-2 Van/Pickup to 1970 R/H
US $60.00
SKU MBP-018

Return Mini 
Rocker Mk1-2 Van/Pickup to 1970 L/H 
(4 Flutes)
Rocker Mk1-2 Van/Pickup to 1970 L/H
US $60.00
SKU MBP-017

Return Mini
Adaptor for Rear Lights R/H;
Adaptor to install Mk 1 Rear Lights to later cars

 

US $35.00
SKU MBP-098

Return Mini
Adaptor for Rear Lights L/H;
Adaptor to install Mk 1 Rear Lights to later cars

 

US $35.00
SKU MBP-099

Return Mini
Battery Box
Battery Box all models

 

US $30.95
SKU MBP-566
This item can be backordered

Return Mini
Rear Suspension Cap
Rear Suspension Cap (same both sides)

 

US $55.00
SKU MBP-500
This item can be backordered

Return Mini
Inner Rear Wheel Arch L/H
Inner Rear Wheel Arch L/H (Repair)

 

US $67.50
SKU MBP-501
This item can be backordered

Return Mini
Inner Rear Wheel Arch R/H
Inner Rear Wheel Arch R/H (Repair)

 

US $67.50
SKU MBP-502
This item can be backordered

Return Mini
Number Plate Carrier Mk 1-2
Number Plate Carrier Mk 1-2

 

US $26.75
SKU MBP-503
This item can be backordered

Return Mini
Rear Wheel Arch Support L/H
Rear Wheel Arch Support L/H

 

US $32.50
SKU MBP-505
This item can be backordered

Return Mini
Rear Wheel Arch Support R/H
Rear Wheel Arch Support R/H

 

US $32.50
SKU MBP-506
This item can be backordered

Return Mini
Inner Rear Corner L/H
Inner Rear Corner Large L/H

 

US $40.00
SKU MBP-545
Only 1 left in stock

Return Mini
Inner Rear Corner R/H
Inner Rear Corner Large R/H

 

US $40.00
SKU MBP-544
Only 1 left in stock

Return Mini
Inner Rear Corner L/H
Inner Rear Corner Small L/H

 

US $27.50
SKU MBP-543
This item can be backordered

Return Mini
Inner Rear Corner R/H
Inner Rear Corner Small R/H

 

US $27.50
SKU MBP-542
This item can be backordered

Return Mini
Spare Wheel Locator
Spare Wheel Locator

 

US $25.00
SKU MBP-504
This item can be backordered

Return Mini
Rear Lower Corner Repair Panel L/H
Rear Lower Corner Repair Panel (above bumper) L/H

 

US $27.00
SKU MBP-535

Return Mini
Rear Lower Corner Repair Panel R/H
Rear Lower Corner Repair Panel (above bumper) R/H

 

US $27.00
SKU MBP-534

Return Mini
Side Trunk Rear Floor L/H
Side Trunk Rear Floor all models L/H

 

US $23.00
SKU MBP-563
Only 1 left in stock

Return Mini
Side Trunk Rear Floor R/H
Side Trunk Rear Floor all models R/H

 

US $23.00
SKU MBP-562
Only 1 left in stock

Return Mini
Trunk Floor Repair rear section
Trunk Floor Repair rear section (Half Floor)

 

US $42.95
SKU MBP-560
This item can be backordered

Return Mini
Trunk Hinge Panel
Trunk Hinge Panel

 

US $40.00
SKU MBP-507
This item can be backordered

Return Mini
Rear Valance all models no holes
Rear Valance all models no holes

 

US $56.00
SKU MBP-546
This item can be backordered

Return Mini
Outside Rear Wheel Arch L/H
Outside Rear Wheel Arch L/H

 

US $45.00
SKU MBP-511
This item can be backordered

Return Mini
Outside Rear Wheel Arch R/H
Outside Rear Wheel Arch R/H

 

US $45.00
SKU MBP-512
This item can be backordered

Return Mini
Trunk Lid Open Frame
Trunk Lid Open Frame Style

 

US $212.00
SKU MBP-515
This item can be backordered

Return Mini
Trunk Lid Closed Frame
Trunk Lid Closed Frame Style

 

US $220.00
SKU MBP-516
This item can be backordered

Return Mini
Radius Arm Cover Mk 1 L/H
Radius Arm Cover Mk 1 L/H

 

US $20.00
SKU MBP-039

</table

Return Mini
Radius Arm Cover Mk 1 R/H
Radius Arm Cover Mk 1 R/H

 

US $20.00
SKU MBP-038

Return Mini
Rear Subframe Web Repair L/H
Rear Subframe Web Repair L/H

 

US $25.00
SKU MBP-339
This item can be backordered

Return Mini
Rear Subframe Web Repair R/H
Rear Subframe Web Repair R/H

 

US $25.00
SKU MBP-340
This item can be backordered

Return Mini
Rear Door Bottom Repair
Rear Door Bottom Repair (inside) L/H

 

US $85.00
SKU MBP-575

Return Mini
Rear Door Bottom Repair
Rear Door Bottom Repair (inside) R/H

 

US $85.00
SKU MBP-574

Return Mini
Rear Corner (under Light) L/H
Rear Corner (under Light) L/H

 

US $30.00
SKU MBP-583
This item can be backordered

Return Mini
Rear Corner (under Light) R/H
Rear Corner (under Light) R/H

 

US $30.00
SKU MBP-584
This item can be backordered

Return Mini
Rear Door Skin
Rear Door Skin (below window) L/H

 

US $97.50
SKU MBP-587
This item can be backordered

Return Mini
Rear Door Skin
Rear Door Skin (below window) R/H

 

US $97.50
SKU MBP-588
This item can be backordered

Return Mini
Rear Panel Inner Corner L/H
Rear Panel Inner Corner L/H

 

US $25.00
SKU MBP-585
This item can be backordered

Return Mini
Rear Panel Inner Corner R/H
Rear Panel Inner Corner R/H

 

US $25.00
SKU MBP-586
This item can be backordered

Return Mini
Rear Door Step
Rear Door Step Van/Traveller

 

US $55.00
SKU MBP-620
Only 1 left in stock

Return Mini
Upper Rear Corner L/H
Upper Rear Corner L/H

 

US $30.00
SKU MBP-581
This item can be backordered

Return Mini
Upper Rear Corner R/H
Upper Rear Corner R/H

 

US $30.00
SKU MBP-582
This item can be backordered

Return Mini
Rear Lower Side Valance L/H
Rear Lower Side Valance L/H

 

US $30.00
SKU MBP-577
This item can be backordered

</table

Return Mini
Rear Lower Side Valance R/H
Rear Lower Side Valance R/H

 

US $30.00
SKU MBP-578
This item can be backordered

Return Mini
Rear Valance
Rear Valance (Centre Section)

 

US $45.00
SKU MBP-576
This item can be backordered

Return Mini
Rear Valance Inner Piece
Rear Valance Inner Piece Van/Traveller

 

US $92.00
SKU MBP-573
This item can be backordered

Return Mini
Subframe Mounting Panel
Subframe Mounting Panel Van Traveller L/H

 

US $57.00
SKU MBP-345

Return Mini
Subframe Mounting Panel
Subframe Mounting Panel Van Traveller R/H

 

US $57.00
SKU MBP-344

Return Mini
Rear Number Plate Bracket
Rear Number Plate Bracket (Two Required)

 

US $15.00
SKU MBP-508
This item can be backordered

Return Mini
Rear Number Plate Hanger
Rear Number Plate Hanger Van/Est

 

US $33.75
SKU MBP-509
This item can be backordered

Return Mini
Rear Corner Seam Cover
Rear Corner Seam Cover Van/Traveller/Pickup

 

US $25.00
SKU MBP-579
This item can be backordered

Return Mini
Rear Seam Cover under doors
Rear Seam Cover under doors Van/Traveller/Pickup

 

US $28.00
SKU MBP-580
This item can be backordered

Return MGB
Pertronix Ignition 

Pertronix Ignition for Lucas Electronic Distributor

Neg Ground

Moss number  222-475

 

US $125.99
SKU LU-147A

Return MGB
Pertronix Ignition 

Pertronix Ignition for a Lucas Electronic Distributor to 1975/80

Neg Ground

Moss number  222-475

 

US $117.00
SKU LU-243

Return MGB
Pertronix Ignition 

Pertronix Ignition for a 45D Lucas Distributor 1975

Neg Ground

Moss number  222-435

 

US $112.95
SKU LU-143

Return MGB
Pertronix Ignition 

Pertronix Ignition for a 25D Lucas Distributor to 1974

Neg Ground

Moss number  222-405

US $104.95
SKU LU-142A

Return  MGB
Bumble Bee Wires

Solid Core Ignition wires in the old competition style look.

NOTE the price is per Ft.  

Moss number  571-020

US $5.30
SKU 571020

Return  MGB
Ignition Coil

Ignition Coil non Ballast 

Moss number 143-220

US $20.00
SKU GCL110

Return  MGB
Ignition Coil

Ignition Coil non Ballast Screw in H.T. lead

Moss number  543-020

 

US $32.99
SKU GCL101
Only 1 left in stock

Return MGB
Champion RN9YC Spark Plug

The "C" at the end of the part number denotes the center electrode is Copper core material better choice when a N9Y is called for. The "R" denotes this plug has a resistor. Use only if required

US $3.00
SKU RN9YC

Return MGB 
Ignition Wire Set

Ignition Wire Set Top entry MGB   Green

Moss number  171-658

 

US $14.95
SKU GHT106-G

Return MGB 
Ignition Wire Set

Ignition Wire Set Top entry MGB   BLACK

Moss number  171-658

US $14.95
SKU GHT106

 

Return
Dr Doolin TR6 Convertible Top Replacement


Dr Doolin's TR6 Convertible Top Replacement

Includes:-

  • Removing the Convertible Top

  • Installing the Frame Hardware

  • Setting the Top

  • Aligning the Frame

  • Header Rail

  • Final Fitting

This DVD shows how to replace the Convertible Top on a TR6. It covers everything from repairing and replacing the hardware on the body to aligning the Convertible Top Frame with the new top.

It shows many of the typcal problems found when installing tops on TR6. It is also usefull to watch and prepare for the job in hand if you have never replaced a Convertible Top before.

 

US $29.95
SKU TR6-DVD_Convertible_top
Only 1 left in stock

MGTF-0
MGTF-1
MGTF-2
MGTF-3
MGTF-4
1/5 
start stop bwd fwd
Return MG TF

The Dr-Doolin's MGTF Fender Blanket Set (Right and Left Fender) is the professional standard of bodywork protection. As shown it covers all the painted fenders up to the running boards. The covers stay in place and the quilted fabric is very durable. Velcro holds the fabric that goes around the fender bracket. Another strip at the back of the Fender Blanket at the running boards fits inside each door.

Machine washable and dry-able. No Bleach.

Fabric Content: Quilted Fabric, Cotton/Polyester Blend filled with recycled Cotton padding.

Fabric Color varies (depending on availability from manufacturer) with Cotton/Polyester Blend Black Binding.

Slight imperfections in the fabric, stitching and color are normal. Produced in

Canada by Dr-Doolin.

US $180.00
SKU MGTF

TR3-0
TR3-1
TR3-2
TR3-3
TR3-4
TR3-5
1/6 
start stop bwd fwd
Return TR3

The Triumph TR3 Fender Blanket is the professional standard of bodywork protection. As shown it covers all the paint and bright work around the engine bay. It will even cover when side mirrors are fitted to the fenders with a simple elastic band around the mirror base. The antenna also can be removed so the blanket lies flat.

The Triumph TR3 Fender Blanket covers the windshield and deck even if the hood is removed for engine removal. An ongoing problem with traditional vinyl covers are that they often scratch the paint and slide off the fenders.

Ours stays in place and the quilted fabric is very durable.

Machine washable and dry-able. No Bleach.

Fabric Content: Quilted Fabric 100% Polyester Blend filled with recycled Cotton padding.

Fabric Color varies (depending on availability from manufacturer) with Cotton/Polyester Blend Black Binding.

Also included: 2 Nylon Spring Clamps to attach to the lip of the engine bay.

Slight imperfections in the fabric, stitching and color are normal.

Produced in Canada by Dr-Doolin.

US $92.00
SKU TR3 FB

 

Mazda-0
Mazda-1
Mazda-2
Mazda-3
1/4 
start stop bwd fwd
Return

Mazda Miata MX5

1999 to 2005


Our Fender Blanket is the professional standard for bodywork protection. As shown it covers all the paint and bright work around the engine bay.

Our Fender Blanket covers the windshield and deck even if the hood is removed for engine removal. An ongoing problem with traditional vinyl covers are that they often scratch the paint and slide off the fenders. Ours stays in place.

Our Fender Blanket is made with high quality Microfiber outer fabric that is dense, and soft, not slippery or shiny. Strong and durable, yet soft. As well as being Stain resistant, fast drying and colorfast. Additionally, the fibers leave no lint or dust, so they are highly recommended for allergy sufferers.

Our Fender Blanket measures 72 x 80 in.(183 x 203 cm.) and weighs 6-8 lbs.(3-4 kg.).

Fabric Content: Zigzag quilted 100% microfiber polyester fabric (made in USA) with recycled cotton padding. Bound with microfiber woven binding and cotton/polyester blend black binding.

Fabric color varies depending on availability from manufacturer. Slight imperfections in the fabric, stitching and color are normal. Machine washable and dry-able. No Bleach.

Made in Canada by Dr-Doolin.

Included are 4 Nylon Spring Clamps to attach to the lip of the engine bay.

US $92.00
SKU Mazda FB

Ford-A-0
Ford-A-1
Ford-A-2
Ford-A-3
Ford-A-4
1/5 
start stop bwd fwd
Return Ford Model A

The Dr-Doolin's Ford Model A 1930 Fender Blanket Set (Right and Left Fender) is the professional standard of bodywork protection. As shown it covers all the painted fenders up to the running boards.

Ours stays in place and the quilted fabric is very durable. Ties hold the front of the Fender Blanket in place by attaching to the fender brackets and velcro holds the fabric in place that goes around the headlight. Another strip at the back of the Fender Blanket at the running boards fits inside each door.

Machine washable and dry-able. No Bleach.

Fabric Content: Quilted Fabric, Cotton/Polyester Blend filled with recycled Cotton padding.

Fabric Color varies (depending on availability from manufacturer) with Cotton/Polyester Blend Black Binding.

Slight imperfections in the fabric, stitching and color are normal.

Produced in Canada by Dr-Doolin.

A special thank you to our US customer, Frank who suggested we make one for his beautiful red car, and to a local car enthusiast, Marc who lent us his lovely black car, called "Mildred" to make the pattern & for the photos above.

US $180.00
SKU Ford FB

This Tool enables the user to remove the Front Spring from a TR3 safely and easily, has a Non-Slip base plate.

To see a complete video on using this tool click HERE
Please note the video at the moment is on the TR6, so the removing of the lower Bump Stop and Support on the TR3 is not shown.

Return

US $85.00
SKU TL107
Only 1 left in stock

Return MGB
AHH6019 Top Frame R/H

Top Frame R/H Stowaway Type

Moss number 454-490 for Right hand Side Frame

US $330.50
SKU AHH6019

Return MGB
AHH6010 Top Frame L/H

Top Frame L/H Stowaway Type

Moss number 454-500 for Left hand Side Frame

US $330.75
SKU AHH6010

Return MGB
8G9288 Gray Folding Top Frame

Gray Folding Top Frame Type      NOTE e-mail for shipping rate

Moss number 406-280

US $429.95
SKU 8G9288

Return MGB
BHH346 Folding Top Frame Standard

Folding Top Frame Standard Type      NOTE e-mail for shipping rate

Moss number 406-290

US $299.95
SKU BHH346

Return MGB
CMZ428 Bolt Top Frame to Body

Bolt Top Frame to Body

Moss number 314-000

US $0.61
SKU CMZ428

Return MGB
SF604061 Bolt Frame to Header Rail

Bolt Frame to Header Rail

Moss number 323-250

US $0.41
SKU SF604061

Return MGB
472335 Tonneau Retaining Plate

Tonneau Retaining Plate

Moss number 472-335

US $2.89
SKU 472335

Return MGB
14B1730 Retainer (chrome)

Retainer for the Rear of the convertible top (chrome)

Moss number 470-747

US $4.75
SKU 14B1730

Return MGB
BHH101 Rear Anchor Bar

Anchor Bar Rear Convertible Top

Moss number 244-210

US $20.95
SKU BHH101

Return MGB
BHH496 Header Rail

Header Rail

Moss number 406-250

US $182.89
SKU BHH496

Return MGB
AHH6440 Retainer Rail Seal MGB

Retainer for Header Rail Seal MGB

Moss number 453-600

US $12.95
SKU AHH6440

Return MGB
BHH2273 Header Rail Seal

Header Rail Seal Type

Moss number 453-610

US $16.95
SKU BHH2273

Return MGB
AHH6530 Tonneau Bar L/H

Tonneau Bar L/H

Moss number 453-640

US $29.95
SKU AHH6530

Return MGB
AHH6529 Tonneau Bar R/H

Tonneau Bar R/H Type

Moss number 453-630

US $29.95
SKU AHH6529

Return MGB
AHH8391 Socket Top Frame/Tonneau Bar

Socket Top Frame/Tonneau Bar

Moss number 472-330

US $11.79
SKU AHH8391

Return MGB
ADB4811 Snap Male with Screw

Snap Male with Screw Type

Moss number 266-800

US $0.99
SKU ADB4811

Return MGB
97H717 Stud Lift-The-Dot

Stud Lift-The-Dot with Nut

Moss number 226-708

US $1.59
SKU 97H717

Return MGB
7H9866S Chrome Snap Female

Chrome Snap Female Type

Moss number 227-108

US $0.51
SKU 7H9866S

Return MGB
GHF400 Header Rail Pad Screw

Header Rail Pad Screw

Moss number 323-635

US $0.34
SKU GHF400

Return MGB
AD606043 T-Base Screw

T-Base Screw Type

Moss number 323-460

US $0.29
SKU AD606043

Return MGB
LFP116 Stud Lift-The-Dot

Stud Lift-The-Dot with Flange

Moss number 226-630

US $2.19
SKU LFP116

Return MGB
AHH6883 Socket Rear Door Pillar

Socket top of Rear Door Pillar for Convertible Top

Moss number 472-310

US $2.00
SKU AHH6883

Return MGB
AHH6882 Backplate

Backplate for the Tongue & Socket MGB Top

Moss number 472-320

US $1.85
SKU AHH6882

Return MGB
AHH6884 Tongue

Tongue Top Tonneau MGB Type

Moss number 472-325

US $1.95
SKU AHH6884

Return MGB
LFS100S Fastener Lift-The-Dot

Fastener Lift-The-Dot

Moss number 226-308

US $1.10
SKU LFS100S

Return MGB
AHA7709 Head Catch (Chrome)

Head Catch (Chrome) Type

Moss number 406-230

US $48.95
SKU AHA7709

Return MGB
53K126 Bolt Catch to Header Rail

Bolt Catch to Header Rail

Moss number 466-385

US $0.41
SKU 53K126

Return MGB
SE604063 Screw Socket to Body

Screw Socket to Body

Moss number 323-001

US $1.59
SKU SE604063

Return MGB
GHF600 Pop Rivet

Pop Rivet

Moss number 325-288

US $0.19
SKU GHF600

Return MGB
AHH6439 Header Rail Pad

Header Rail Pad

Moss number 406-260

US $1.54
SKU AHH6439

US $19.95
SKU MGB_Convertible_Top_Replacement

US $19.95
SKU TR6_Convertible_Top_Replacement

ReturnMGB
Vacuum Advance/Retard

Vacuum Advance/Retard  Reproduction

  Distributor Number #41156

 Moss Number  560-151

US $90.00
SKU 41156
This item can be backordered

Return MGB
Vacuum Advance/Retard

Vacuum Advance/Retard   1968/70

  Distributor Number  #41155

Moss number 163-630

US $78.00
SKU 41155
This item can be backordered

ReturnMGB
Vacuum Advance/Retard

Vacuum Advance/Retard Distributor number 40897

from 1962-1967

 Moss Number  163-665

US $90.00
SKU 40897
This item can be backordered

Return GWP188
Water Pump

Water Pump No Alternator Bracket. MPI engines only

 

US $43.00
SKU GWP188
Only 1 left in stock

Return 802305
Snap Male plastic Black

Snap Black plastic male that goes on the body

Moss number 802-305   

US $0.59
SKU 802305-1

MGA-0
MGA-1
MGA-2
MGA-3
1/4 
start stop bwd fwd
Return MGA
   The Fender Blanket is the professional standard of bodywork protection. As shown it covers all the paint and bright work around the engine bay. The antenna also can be removed so the blanket lies flat. The Fender Blanket covers the windshield and deck even if the hood is removed for engine removal. An ongoing problem with traditional vinyl covers are that they often scratch the paint and slide off the fenders.
   Ours stays in place and the quilted fabric is very durable. The Fender Blanket is made for each indvidual model of Car. It is machine washable and dryable.
US $92.00
SKU FenderB-MGA
Only 1 left in stock

Return GRC1110
Radiator Pressure cap 15 lbs

Radiator Pressure Cap cooper 1980 to 92 except Radiator with Sender

Moss number 459-695

US $8.95
SKU GRC1110

Return GRC105
Radiator Cap 10 lbs

Radiator Pressure Cap 10 lbs fits Mini Cooper

 

US $5.75
SKU GRC105
This item can be backordered

Return GRC102
Radiator Cap

Radiator Pressure Cap 7 lbs Short neck

Moss number 834-820

US $5.50
SKU GRC102

Return GRC101
Radiator Cap 7 lbs

Radiator Pressure Cap 7 lbs early original type with the long neck,

the depth in the radiator neck required is approx 1-5/16" 

Moss number 583-004

US $5.50
SKU GRC101
Only 1 left in stock

Return ARP200
Radiator

Stock 3 Core radiator for up to 1992

Moss number 114-200

US $129.00
SKU ARP2000

Return 2207ABS
2207ABS  TR6 Top BLACK vinyl

TR6 Top, zip-out rear window, BLACK English "dull cote" with no Reflective Strips

Moss number 640-115

US $400.00
SKU 2207ABS
This item can be backordered

Return 2207ACG-T
TR6 Top TAN vinyl

TR6 Top, zip-out rear window, TAN crush grain vinyl with no Reflective Strips. Sorry no picture of a Tan Top yet.

Moss number 640-170

US $360.00
SKU 2207ACG-T
This item can be backordered

Return 2207ACG-W
TR6 Top WHITE vinyl

TR6 Top, zip-out rear window, WHITE crush grain vinyl with no Reflective Strips. Sorry no picture of a white top yet

Moss number 640-130

US $360.00
SKU 2207ACG-W
This item can be backordered

Return 2207ACG
TR6 Top BLACK vinyl

TR6 Top, zip-out rear window, BLACK crush grain vinyl with no Reflective Strips

Moss number 640-120

US $360.00
SKU 2207ACG
This item can be backordered

Return 2207AST-T
TR6 Top TAN Canvas

TR6 Top, zip-out rear window, Stayfast Canvas, TAN with no Reflective Strips. Sorry no picture of Tan Tops yet.

Moss number 640-170

US $660.00
SKU 2207AST-T
This item can be backordered

Return 2207AST
TR6 Top BLACK Canvas

TR6 Top, zip-out rear window, Stayfast Canvas, BLACK with no Reflective Strips

Moss number 640-160

US $660.00
SKU 2207AST
This item can be backordered

Return 2220CG
TR6  Top, BLACK Vinyl

TR6  Top, BLACK crush grain vinyl with reflective strips

Moss number 640-150

US $520.00
SKU 2220CG
This item can be backordered

Return 2219ZCG
TR250 Top, BLACK vinyl

TR250 Top, BLACK crush grain vinyl with reflective strips and zipout window

Moss number 640-145

US $530.00
SKU 2219ZCG
This item can be backordered

Return 2219CG
TR250 Top, BLACK vinyl

TR250 Top, BLACK crush grain vinyl with reflective strips

Moss number 640-160

US $465.00
SKU 2219CG
This item can be backordered

ReturnTL204-5
Snap Fitting Tools

This includes the Rotating Punch and the Button Snap installation Tool need to fit the snaps to the convertible tops, sold as a pair.

US $60.00
SKU TL204-5

Return INTR6-T
Installation Kit Plus Required Tools

The complete installation kit including the

TL204 Rotating Punch and the TL205 Button Snap Installation Tool

US $240.00
SKU INTR6-T

Return 516158
Screw Frame to Body

Countersunk screw used to secure the convertible frame to the body, these enable the frame to clear the bolt head as the frame folds down into place.

Moss number 314-165

US $2.80
SKU 516158

Return 621273-V
Velcro Extra Wide Front

The Front Velcro that holds the convertible top to the frame over the doors. These are extra wide to enable the use of the hold down strip which in turn prevents the velcro coming away from the frame when only held in place by glue.

US $14.00
SKU 621273-V

Return 621274-V
Velcro Exta Wide Rear

The Rear Velcro that holds the convertible top to the frame over the doors. These are extra wide to enable the use of the hold down strip which in turn prevents the velcro coming away from the frame when only held in place by glue.

US $14.00
SKU 621274-V

Return 517140-1
Bolt Assembly

The bolts used in securing the channel, velcro strip and the locking strip to the convertible frame. Set includes 14 bolts, washers and nyloc nuts

US $18.00
SKU 517140-1

Return 621274-S
Hold Down Strip Rear

The strip used on the rear part of the frame to keep the velcro strip in place rather than relying on just glue, the same both sides.

US $10.00
SKU 621274-S

Return 621273-S
Hold down Strip Front

The strip used on the front part of the frame to keep the velcro strip in place rather than relying on just glue, the same both sides.

US $10.00
SKU 621273-S

Return 621758
Washer for the Locking Pin

Special wavy washer for the locking pin, keeps enough tension to hold the pin in position to stop rattles when the top is down. Yet still allows movement to lock the header frame in place. 

Moss number 803-465

US $1.00
SKU 621758

Return 621759
Escutcheon

Escutcheon, refering to the plate that secures the locking pin into the header frame.

Moss number 803-475

US $12.00
SKU 621759

Return 623431
Locking Pin

The locking pin in the Header bar for securing the convertible frame to the Windsheild frame.

Moss number 803-455

US $37.00
SKU 623431

Return LX6354
Screw for the Locking Handle

This screw is often broken flush into the locking pin or just plain missing.

Moss number 323-415

US $0.29
SKU LX6354

Return 621757
Handle for Convertible Top

Handle for the lock on the Header Bar

Moss number 803-445

US $18.79
SKU 621757

Return 602030
Retainer for the Webbing to Frame

The small retainer securing the webbing onto the hoops on the convertible top frame

Moss number 326-630

US $1.49
SKU 602030

Return 571097
Retainer for the Webbing

Small peice of wire to hold the webbing in place on the retaining bar. 

Moss number 644-295

US $1.89
SKU 571097

Return 574786
Webbing for the Top Frame

The Black webbing that goes between the hoops on the convertible top frame, Two per car required

Moss number 644-285

US $8.99
SKU 574786

Return 325287
Snap Pop-Rivet

Pop-Rivet for the snap's used on both the converible tops and the snap's on the body

Moss number 325-287

US $0.20
SKU 325287

Return 802317
Snap Female Black plastic

Snap black plastic matches to 802307, snap comes with the new convertible top.

Moss number 802-317

US $0.79
SKU 802317

Return 802307
Snap Button Black

Snap button for the snap assembly on the convertible top, Black in colour. Comes with the New Converible top. Sold individually requires part 802317 if black plastic snap is required

Moss number 802-307

US $0.79
SKU 802307

Return 712400
Channel Door top Rear

The Channel the seal goes in on the convertible top to the rear of the door glass. Same both sides

Moss number 803-635

US $9.89
SKU 712400

Return 621281
Channel Door top Front

The Channel the seal goes in on the convertible top to the front of the door glass. Same both sides

Moss number 803-625

US $9.89
SKU 621281
This item can be backordered

Return 621274
Seal Top Door Rear

This seal is the same both sides it's the Top Rear peice, Converible top to door glass

Moss number 681-060

US $2.29
SKU 621274
This item can be backordered

Return 621273
Seal Top Door Front

This seal is the same both sides it's the Top Front peice, Converible top to door glass

Moss number 681-050

US $2.29
SKU 621273
This item can be backordered

Return 713038
Channel R/h side for Header Seal

The end peice R/H Channel on the header rail

Moss number 803-655

US $8.00
SKU 713038

Return 713037
Channel L/h side for Header Seal

The end peice L/H Channel on the header rail

Moss number 803-645

US $8.00
SKU 713037

Return 713036
Channel for the Header Rail seal

Center section of the Header rail seal Channel, two outside sections required as well

Moss number 803-665

US $6.79
SKU 713036

Return 616187
Seal Top Header Rail

The Seal for the Header Rail should be replaced every time a new Top is fitted, or if you are experencing leaking from the Top to Windsheild joint

Moss number 681-040

US $8.49
SKU 616187

Return 617975
Rivet nut is no longer available

The Rivet nut is no longer available so a Nyloc nut can be substituted.

US $0.30
SKU 617975

Return 510506
Lock washer for Retaining bar bolt

The Lock or Spring washer for the retaining bar hold down bolt.

US $0.20
SKU 510506

Return 506185
Bolt for the Retaining Bar

Bolt for securing the Retaining bar to the Back deck five are required

Moss number 323-425

US $0.79
SKU 506185

Return 812832
Rear Retaining Bar

The bar that fits fastens the Convertible top to the back deck

Moss number 854-550

US $38.97
SKU 812832

621273 x 2 Seal Door Top Front
621274 x 2 Seal Door Top Rear
621281 x 2 Channel Door Top Front
712400 x 2 Channel Door Top Rear
621273-S x 2 Hold Down Strip Front
621274-S x 2 Hold Down Strip Rear
621274-V x 2 Velcro extra wide Rear
621273-V x 2 Velcro extra wide Front
517140-1 Bolt Assembly (Set of 14 Bolts,Nuts,Washers)
616187 Seal Top Header Rail
713036 Channel Centre Header Rail
713037 Channel L/H Header Rail
713038 Channel R/H Header Rail

 

Return  
Convertible Installation Kit

The Kit comes with all the parts listed above

US $150.00
SKU INTR6
This item can be backordered

The tool for installing the button snap on new convertible tops or as a repair.

Does so without putting a dent on the dome of the button

Return

US $9.00
SKU TL205
This item can be backordered

This is the tool for making holes in your new convertible top to install the snaps. Very accurate and easy to use.

Various sizes of holes can be managed by simply rotating the punch head

Return

US $55.00
SKU TL204

A small Wrench to enable easy adjustment to the Mixture Adjustment Nut on the SU Carb

Return

US $5.15
SKU TL401
Only 1 left in stock

This tool is for use on SU Carb Mixture Adjustment Nut 5/16 Whitworth

Return

US $2.40
SKU TL400

This tool is used to insert the Locking Strip into the windshield Rubber, on a number of British cars,

inc. Triumph and Mini. Cheap enough for one time use and way better than a screwdriver

Return

US $22.00
SKU TL203
This item can be backordered

Flywheel Puller for use on the Classic Mini. Will fit both Vergo and Pre-Vergo Type Clutch.

Return

US $55.00
SKU TL202

This Deep Socket fits the Suspension Ball Joints and the Flywheel Bolt on the Classic Mini

Return

US $30.00
SKU TL106

The tool is for a Classic Mini. It is used to compress the Rubber Suspension Cone on the 1976 and later Cars.

This tool has Metric Threads so will only fit earlier cars with replacement Cones.

Return

US $85.00
SKU TL105
This item can be backordered

 
Return  
AA4039 Bolt Set

Bolt Set for the Driveshft to Axle Flange. Can be used on Early Pre-Syncro Boxes on the Gearbox end. These bolts have the correct length Shank. 
Use new Nyloc nuts or lock washers when refitting old Bolts.

Moss number 321-858 for single bolt 

US $5.00
SKU AAA4039

Return  
22H1107 Bolt Set

Bolt Set for the Driveshaft to Gearbox Flange. Bolt heads are rounded for Syncro boxes.
Use new Nyloc nuts or Lock Washers when refitting old Bolts.

Moss number 321-848 for single bolt

US $12.00
SKU 22H1107

Return  
7H3878 Sealing Cap

Sealing cap is for protection of the Splines on the Driveshaft which stops the Grease coming out and the dirt going in.

Moss number 268-035

US $7.95
SKU 7H3878

Return  
UHN400 Grease Nipple (Short)

Grease Nipples do actually wear out. The Grease gun has trouble connecting properly then pushes grease everywhere except where it's needed.

Moss number 328-540

US $1.50
SKU UHN400

Return  
7H3865  Sleeve-Yoke

The Sleeve-Yoke fits on the Transmission end of the Driveshaft. It should be changed if the holes are worn for the U-Joint, rather than play in the Splines. In that case a complete shaft is required. Using a Brand new Sleeve-Yoke on worn splines is not a good idea. 

Moss number 268-020

US $48.00
SKU 7H3865

Return  
7H3858  Grease Nipple (long)

Grease Nipple long type for difficult access places. if used in the U-Joint make sure the joint is the correct way round for clearance.

Moss number 328-530

US $2.00
SKU 7H3858

Return  
AHH7486  Complete Driveshaft 32"

Driveshaft for Overdrive Transmission with the Tubed Type Axle

Moss number 268-100

US $210.00
SKU AHH7486
Only 1 left in stock